1
Insert the Easy-lock clips underneath the OSBLOCK™
2
Insulate inside the rail using urethane.
3
Insulate inside the side mortise as well.
4
Insert the OSBLOCK™ length in the rail.
5
Lock the block in place with a 1/4 rotation using the OSBLOCK™ key
If linking to a corner
1
Cut the tenon that will link to the corner.
2
Pull down the plate and screw it to the OSBlock top rail.
Previous step
Install the corners
Install the corners.Apply urethane foam inside the rail.Insert the corner in the railLevel the corner on both sides.Brace the corner piece with 2 x 4.
Next step
Ending rail
Install the ending rail.Insulate inside the rail of the last OSBLOCK™ row .Slide the ending rail in the groove of the last OSBLOCK™ row.On each corner, cut 4 inches into the tenon of one of the rail to make sure the joint is seamless.The OSBLOCK™ wall is now ready to...