1
Apply urethane foam inside the rail.
2
Insert the corner in the rail
3
Level the corner on both sides.
4
Brace the corner piece with 2 x 4.
Previous step
Install the starting rail
Install the starting rail.The starting rails must be assembled at 45 degrees. They must be fixed from their thick parts, do not nail or screw anything in the groove of the rail. Before screwing (3 1/2” screw recommended) or nailing the rail, it is recommended to...
Next step
Erect the walls
Erect the walls.Insert the Easy-lock clips underneath the OSBLOCK™Insulate inside the rail using urethane.Insulate inside the side mortise as well.Insert the OSBLOCK™ length in the rail.Lock the block in place with a 1/4 rotation using the OSBLOCK™ keyCut the tenon...