by osbx22admx1 | Oct 6, 2022 | Preparation
PreparationBefore you get started. Site preparationBefore you start, make sure the quality of the level, the square and the alignment of the base that will receive your walls. Osblock can take a 1/8” variant. The correction will happen by itself at the 3rd row...
by osbx22admx1 | Oct 6, 2022 | Preparation
OSBLOCK™ 101Required tools and hardware. Required hardware• #10 2 1/2” and 3 1/2” flat head screws• Low expansion urethane foam (1 can per 10 blocks)• Wood strapping• 1/2” OSB or plywood board• 2” insulation foam• Air barrier• LVL Beams –...
by osbx22admx1 | Oct 6, 2022 | OSBlock™ 101
OSBLOCK™ GuideInstall the starting rail. Two ways possibleThe starting rails must be assembled at 45 degrees. They must be fixed from their thick parts, do not nail or screw anything in the groove of the rail. Before screwing (3 1/2” screw recommended) or nailing the...
by osbx22admx1 | Oct 6, 2022 | OSBlock™ 101
OSBLOCK™ GuideInstall the corners. 1Apply urethane foam inside the rail. 2Insert the corner in the rail 3Level the corner on both sides. 4Brace the corner piece with 2 x 4. Previous step No Results Found The page you requested could not be found. Try refining your...
by osbx22admx1 | Oct 6, 2022 | OSBlock™ 101
OSBLOCK™ GuideErect the walls. 1Insert the Easy-lock clips underneath the OSBLOCK™ 2Insulate inside the rail using urethane. 3Insulate inside the side mortise as well. 4Insert the OSBLOCK™ length in the rail. 5Lock the block in place with a 1/4 rotation using the...
