by osbx22admx1 | Oct 6, 2022 | OSBlock™ 101
OSBLOCK™ GuideInstall the starting rail. Two ways possibleThe starting rails must be assembled at 45 degrees. They must be fixed from their thick parts, do not nail or screw anything in the groove of the rail. Before screwing (3 1/2” screw recommended) or nailing the...
by osbx22admx1 | Oct 6, 2022 | OSBlock™ 101
OSBLOCK™ GuideInstall the corners. 1Apply urethane foam inside the rail. 2Insert the corner in the rail 3Level the corner on both sides. 4Brace the corner piece with 2 x 4. Previous step No Results Found The page you requested could not be found. Try refining your...
by osbx22admx1 | Oct 6, 2022 | OSBlock™ 101
OSBLOCK™ GuideErect the walls. 1Insert the Easy-lock clips underneath the OSBLOCK™ 2Insulate inside the rail using urethane. 3Insulate inside the side mortise as well. 4Insert the OSBLOCK™ length in the rail. 5Lock the block in place with a 1/4 rotation using the...
by osbx22admx1 | Oct 6, 2022 | OSBlock™ 101
OSBLOCK™ 101Doors and windows. Before we beginWhat you need to knowThe OSBLOCK™ system greatly simplifies the installation of doors and windows. Every block measures 11′ 3/4” of height so the OSBLOCK™ row will adjust to the standard height of doors and...
by osbx22admx1 | Oct 6, 2022 | OSBlock™ 101
OSBLOCK™ 101Install the ending rail. 1Insulate inside the rail of the last OSBLOCK™ row . 2Slide the ending rail in the groove of the last OSBLOCK™ row. 3On each corner, cut 4 inches into the tenon of one of the rail to make sure the joint is seamless. Roof trussesThe...
by osbx22admx1 | Oct 6, 2022 | OSBlock™ 101
OSBLOCK™ 101Final steps. Sealing the wallsOnce your walls are erected, doors and windows openings made and your ending rail fixed, you need to make sure the structure is sealed using urethane. Pay a special attention to the corner joints. Walls bottomA strip of rigid...
